Instrument Sterilizer (Code: STERI 250)

Introducing the instrument sterilizer 

Currently, scientific technology is increasingly developing, so biomedical equipment and tools are also becoming more advanced. That helps ensure the development of the biomedical industry so that many medical solutions can be found in the future to help make human life better.

In order to achieve this, it is essential to ensure that laboratory and medical instruments are clean and sterile to avoid any impact on health. Therefore, ABT Biological Solutions Company has conducted research and manufactured the Instrument Sterilizer STERI 250 based on products from both domestic manufacturers and international manufacturers.

The Instrument Sterilizer STERI 250 is produced domestically by ABT Medical Solutions Company. Consequently, the purchase and sale are facilitated with a reasonable cost, ensuring compliance with consumer standards and requirements.

The Instrument Sterilizer STERI 250 is an upgraded version of the STERI 200, increasing the heating capacity to 250⁰C. It is equipped with an additional cooling fan at the rear to dissipate heat, ensuring user safety.

Specification

• Voltage: 220V/50hz
• Temperature range: 100⁰C – 250⁰C
• Heating capacity from 30⁰C to 250⁰C during 20 minutes
• Temperature display makes control easy
• Material: Powder coated iron and stainless steel 304
• Weight: 3.9 Kg
• Disinfection chamber capacity: 6x12cm (320mL)
• Machine dimensions: Height 271mm x Width 171mm x Length 190mm

Highlights

• Compact in size, facilitating easy mobility.
• Fast heating ability.
• Automatic power cutoff in case of overheating.
• The chamber has a capacity of 320 mL and can sterilize 3–4 instruments simultaneously (such as scissors and scalpels).
• High quality stainless steel material, chemical resistant and easy to clean.
• High aesthetics.
• 450 grams of heat-retaining silica gel.
• Automatically saves previously set temperature.
• Equipped with a cooling fan for machine casing.

User manual of The Instrument Sterilizer STERI 250

• Step 1: Turn on the power switch, the display will look like the picture.
• Step 2: Press the “Set” button, the temperature screen will display flashing, press the up and down arrow buttons to increase or decrease the temperature as desired.
• Step 3: Wait 3 seconds, the machine will automatically heat up and within 20 minutes it will reach the set temperature

*Note: During operation, the machine body will get hot, so be careful not to touch the machine directly during use.

Clean the sterilizer

• Unplug the machine's power cord, wait for the machine to cool to room temperature, then clean the machine.
• When chemicals adhere to the surface of the apparatus, proceed to wipe the entire surface with a soft cotton cloth soaked in concentrated liquid soap. Subsequently, wipe off the lather using a piece of cotton fabric or a towel soaked in warm or hot water. Finally, thoroughly clean the entire surface with a cotton cloth or dry towel.
• Note: Do not use highly corrosive detergents because they can corrode stainless steel

Common errors 

WARNING

• Make sure the input voltage is correct and stable.
• Place the machine on a flat place.
• In case of abnormal heat in the apparatus or the emission of smoke, immediately disconnect the power and contact the supplier for resolution.

Conclusion

• The sterilizer design is simple but modern
• The machine shell is made of powder-coated iron with high durability and beautiful paint color. The heating tube is made of high-quality stainless steel, chemical resistant and easy to clean.
• Simple installation interface, easy to use
• Design and interface are always improving
• The machine only needs to set the temperature once, the next time you use it, just turn it on and use it, no need to reset.
• Size options for customers to choose from

Refer to other devices:

Class II biological safety cabinet 

PCR cabinet 

Automated nucleic acid extraction system