Instrument Sterilizer (Code: STERI 200)

Introducing the instrument sterilizer 

Currently, scientific technology is increasingly developing, so biomedical equipment and tools are also becoming more advanced. That helps ensure the development of the biomedical industry so that many medical solutions can be found in the future to help make human life better.

– And to do that, it will be necessary to ensure that laboratory and medical instruments are clean and sterile so that their health is not affected. For that reason, ABT Biomedical Solutions Co., Ltd. has researched and manufactured the STERI 200 Instrument Sterilizer based on products from domestic and foreign brands abroad.

– STERI 200 Instrument Sterilizer is domestically produced by ABT Medical Solutions Company Limited. Therefore, buying and selling is easy at an affordable price and meets the standards and requirements of consumers

Specification

• Voltage: 220V/50hz
• Temperature range: 100⁰C – 200⁰C
• Heating capacity from 30⁰C to 200⁰C during 20 minutes
• Temperature display makes control easy
• Material: Powder coated iron and stainless steel 304
• Weight: 3.1 Kg
• Disinfection chamber capacity: 6x12cm (320mL)
• Machine dimensions: Height 223mm x Width 150mm x Length 155mm

Advantage:

The machine has a compact size and is easy to move.

Fast heating ability.

The chamber size is 320ml and can sterilize 3-4 tools at the same time (scissors, knives...).

High quality stainless steel material, chemical resistant and easy to clean.

High aesthetics.

Included with the machine is 450 grams of heat-retaining silicagel beads.

Automatically saves previously set temperature.

Instructions for STERI 200 instrument sterilizer

• Step 1: Turn on the power switch, the display will look like the picture.
• Step 2: Press the “Set” button, the temperature screen will display flashing, press the up and down arrow buttons to increase or decrease the temperature as desired.
• Step 3: Wait 3 seconds, the machine will automatically heat up and within 20 minutes it will reach the set temperature

*Note: During operation, the machine body will get hot, so be careful not to touch the machine directly during use.

Clean the sterilizer

• Unplug the machine's power cord, wait for the machine to cool to room temperature, then clean the machine.
• When chemicals adhere to the body of the machine, clean the entire surface with a soft cotton cloth soaked with concentrated liquid soap. Then, wipe off the foam with a cotton cloth or towel that has been soaked with hot or lukewarm water. Finally, wipe the entire surface with a cotton cloth or dry towel.
• Note: Do not use highly corrosive detergents because they can corrode stainless steel

Common errors 

WARNING

• Make sure the input voltage is correct and stable.
• Place the machine on a flat place.
• When the machine body is unusually hot, or smoke appears, immediately disconnect the power and contact the supplier for resolution.

Conclusion

• The sterilizer design is simple but modern
• The machine shell is made of powder-coated iron with high durability and beautiful paint color. The heating tube is made of high-quality stainless steel, chemical resistant and easy to clean.
• Simple installation interface, easy to use
• Design and interface are always improving
• The machine only needs to set the temperature once, the next time you use it, just turn it on and use it, no need to reset.
• Size options for customers to choose from

Refer to other devices:

Class II biological safety cabinet 

PCR cabinet 

Automated nucleic acid extraction system